CLICK ABOVE LOGO TO REGISTER & BID
ON DAY 2 CALGARY & SEE ALL ITEMS!
CALGARY LOCATION - DAY 2
CLOSEOUT AFTER 65 YEARS! (AB company)
Due to the passing of the founder and the loss of his operations
leadership, the family has made the difficult decision to cease
operations at both the Edmonton and Calgary locations.
$5,500,000 IN MACHINES & INVENTORY at BOTH LOCATIONS TO BE SOLD BY AUCTION!
DAY 2: TUES., AUG. 12th, 2025 @ 8AM
CALGARY LOCATION: 11488 70th STREET SE, CALGARY, AB T2C 4Y3
Preview: Tues. to Fri., Aug. 5th to 8th - 8am to 5pm each day AND Mon. & Tues., Aug. 11th & 12th - 8am to 5pm each day.
CLICK ABOVE LOGO TO REGISTER & BID
ON DAY 2 CALGARY & SEE ALL ITEMS!
Modern Brochure LOT LISTING
DAY 2
Terms and conditions:
An 18% Buyer’s Premium applies on all purchases. All purchases must be paid in full by CASH, DEBIT, E-TRANSFER, BANK DRAFT, BANK WIRE TRANSFER (Credit cards [Visa, M/C] accepted on invoices NOT EXCEEDING $2000 on entire purchase). FOR BUYER CONVENIENCE, PAYMENT WILL BE ACCEPTED ON SITE ON THE DAY FOLLOWING THE SALE ONLY ACCORDING TO THESE PAYMENT METHODS, OTHER THAN BANK WIRE TRANSFERS, Applicable buyer’s premium and 5% GST & PST. Full payment details available on Bidspotter. Everything will be sold “AS IS,” “WHERE IS,” “AS AVAILABLE”, with no warranties, guarantees or representations, expressed or implied.
REMOVAL INFO:
Removal hours 8AM - 4PM starting Wed, Aug. 13th, 2025. Closed Sunday. Final Removal by 4PM Thurs., Aug. 21st, 2025.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS
Prime Movers Rigging & Industrial Service Inc.
Attn: Dan Reed
Office: 1-403-663-0960
Mobile: 1-403-978-8072
Fax: 1-587-538-6988
dreed@primemoversinc.ca
Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com
SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3
CLICK ABOVE LOGO TO REGISTER AND BID
CNC MACHINES
ACCURL MAX MJ-4020L CNC WATERJET CUTTING TABLE
2023 LEADWELL LTC 210 CNC LATHE (UNUSED)
2023 LEADWELL T7A-208 CNC LATHE (UNUSED)
2022 LEADWELL V-42AF MACHINING CENTER
QUICKMILL 12025224 CNC MACHINE
2006 MODERN VMC1300 VERTICAL MACHINING CENTRE
2013 MODERN 1500MM CNC MILL
2018 MICROCUT M760 MACHINING CENTER
2008 MODERN MM430 3-AXIS MILLING MACHINE
MODERN TNC-670 x 3000 6" CNC LATHE
BNC2280XL CNC LATHE
2006 MODERN 1500MM CNC MILL
2013 SYIL X-5 PRO CNC MILL (UNUSED)
(3) SYIL AEX-250 CNC LATHE W/ 3 JAW (UNUSED)
(2) SYIL X-5 CNC (UNUSED)
MODERN 30120XXXL CHALLENGER 10” CNC LATHE
MODERN BNC2260X CNC LATHE
TOSS FV-25 CNC MILLING MACHINE
CINCINNATI HAWK 200 A2100 MOD. ERD CNC LATHE
URSVIKEN OPTIMA 500 CNC PRESS BRAKE
ENSHU ACCU-MILL yuasa AM-1547 cnc
BUFFALLO BNC-2680XXL CNC LATHE
TONG IL-TNL-60 CNC SLANT BED LATHE
YANG ML-60A CNC LATHE W/ FANUC
1654 BEDMILL
(2) LEMCA BAR FEEDER
MANUAL LATHES
MODERN LA780 X 3000 (UNUSED)
MODERN LA 560 X 2000 (UNUSED)
(2) 2016 PINACHO SC/250 – 58 X 1500 (UNUSED)
2024 MODERN C6246 X 1500 (UNUSED)
2023 MODERN C6241 X 1500 (16 X 60) (UNUSED)
2023 MODERN C624 X 1000 (UNUSED)
MODERN CQ6128 X 660 (11 X 26)
MODERN 430 X 1100
STANKO IA983 HOLLOW SPINDLE
WOHLENBERG LATHE
TOS TRENCIN 440 SN71B
STANKO IM63
TOS SN50C X 2000
MYFORD SUPER 7
MILLING MACHINES
(6) MODERN 3VM (UNUSED)
HECKERT FU450
MODERN 4KHV
EXCELLO MILL
1987 TOS FNK25
MODERN VERTICAL MILL
JAROCIN FWD32
U-X6232C X 16 UNIV ROTARY HEAD
SUPERMAX YC-1 ½ VS
KEARNY & TRECKER 310 S-15
TOS FA5B-U UNIVERSAL
KEARNEY & TRECKER TK450 VERTICAL
(3) TS-125 SLOTTING HEAD (UNUSED)
BANDSAWS
(5) 2024 MODERN W1318-S, HORIZ. (UNUSED)
(6) MODERN UE-250S (10 X 16), HORIZ. (UNUSED)
(3) 2023 MODERN UE916-A (9 X 16), HORIZ. (UNUSED)
(7) 2024 MODERN UE712-SB, HORIZ. (UNUSED)
MODERN KV-60 VERTICAL, 2HP/220/3 (UNUSED)
(5) MODERN UE-712-CSA 7 X 12 BANDSAW (UNUSED)
HYD-MECH S20-P SERIIES III BANDSAW
HYD-MECH DM-1215 DOUBLE MITRE BANDSAW
HYD-MECH S-20 HORIZ. BAND
FORTE 250 BANDSAW
JAESPA W260DG BANDSAW
BS250AS SWIVEL BANDSAW
JAESPA HORIZ. BAND
HORIZ. BANDSAW
GENERAL TABLE SAW
DRILLS
Z3035B RADIAL ARM
MEUSER M30R RADIAL
DRILLMASTEER 23050 X 12(II) RADIAL
HAVLIK Z3035B RADIAL
Z3050-12 RADIAL ARM
SUPERMAX RADIAL ARM
CASER 80-2500 RADIAL ARM
KAO MING RADIAL ARM
2023 MODERN ZN5050-A GEAR HEAD (UNUSED)
2024 MODERN DH-28 GEAR HEAD (UNUSED)
MODERN MD45 MILL DRILL
2024 MODERN CH-30 FLOOR (UNUSED)
2019 CH-30 FLOOR (UNUSED)
STRANDS GEARHEAD
JME USA 202M MAG DRILL (UNUSED)
FEIN KBM-320 MAG DRILL (UNUSED)
GPL-600 PORTABLE/PERMANENT MAG BASE
GRINDERS / SANDERS
2017 BAILEIGH ES-9138 EDGE SANDER (UNUSED)
2011 BAILEIGH DBG-106 BELT / DISK GRINDER (UNUSED)
1956 BLOHM HFS510 SURFACE GRINDER
CHEVALIER FSG-1224ADII SURFACE GRINDER
BLANCHARD #11 CYLINDRICAL GRINDER
BALDOR TILTING TOOL GRINDER
HARMONY 250-3 DRILL BIT GRINDER
FEIN GIR75 GRINDER
(3) DG-675 UNIVERSAL DRILL GRINDER (2 UNUSED)
GALLANT 399 MINI ROTOBELT
BELT GRINDING BASE
FABRICATING
ALLSTEEL 120-14 BRAKE
HACO HSLX4006 SHEAR
ALLSTEEL 10G-10 SHEAR
ROTO DIE HYD. #10 BRAKE
HYDRAULIC BENDING MACHINE
FICOM JE21-125D PUNCH PRESS
DURMA VN-2006 NOTCHER
SCOTCHMAN 314C IRONWORKER
DURMA FN2506 NOTCHER
PROMOCAM VERSAFIX NOTCHER
HOSSFELD #2 UNIVERSAL BENDER (UNUSED)
GIR PIPE NOTCHING MODULE (UNUSED)
SHEET METAL
BAILEIGH LF20 LOCKFORMER (UNUSED)
NU-4822 1220 X 0.8MM BOX & PAN BRAKE
2021 LINMAC X5016-E 50 X 16 GA. POWER ROLLS (UNUSED)
2023 LINMAC A-5216 PPNEUMATIC SHEAR (UNUSED)
FEIN BLS-4 2 8 GA. SHEAR (UNUSED)
BAILEIGH SBR-5216 SHEAR/ROLL/BRAKE (UNUSED)
DURMA PBM-50 ROLL
(2) BAILEIGH HP-160 HAND PUNCH (UNUSED)
(2) 120 X 1.5 – 3 IN 1 MANUAL MACHINE (UNUSED)
1016 – 3 IN 1 MANUAL MACHINE (UNUSED)
(2) BR-18M-18 MANUAL 18 GA. BEAD ROLLER (UNUSED)
ROPER WHITNEY 3X3X1/4 #62 HAND SHEAR
3 IN 1 / 1320 SHEAR/PRESS BRAKE/LIP ROLL
2011 HGG CNC Pipe Profiler (OFF SITE) - NEW COST TODAY APPROX. $700,000 US
Model: SPC 500, 3-Phase 230V/400V, Can be used w/ or w/o its buffer (infeed and outfeed) system*, Cuts multiple chamfers, holes, slots, miter holes, miter saddles, etc., Pipe range: 48 - 510mm, No max pipe length but infeed is designed for up to 12m, Biaxial cutting head, Initialization laser point, Vertical out-of-roundness compensation, Kjellberg FineFocus 450 air plasma, 31mm max wall thickness, Fume exhaust system incl Donaldson filter unit, 15" flat screen operator interface.
2011 HGG CNC Pipe Profiler
*Description and operational sequence of HGG SPC 500 with In-feed and out feed system:
Infeed:
A conveyor system of 13.5m by 570mm is used to move the pipes through the wall and chuck (up to 510mm) on to the gutter ball tray on the cutting machine. There are 10 electrically powered diablo rollers to move the pipe across on the conveyor system.
Integrated with the conveyor is a buffer table to:
A) Store pipes
B) Deliver pipe to the conveyor system.
The buffer table has 6 arms that are 4.5m long each. In a neutral position the arms are sitting just below the diablo roller on the conveyor. While in this position pipes can be loaded on the buffer table. Each arm has a chain that is controlled electrically and synchronized in travel speeds. The chain system incorporates stops that prevent the pipes to roll forward or backwards.
Loading a pipe from the buffer table to conveyor:
From the infeed remote control panel the sequence of loading pipe can start:
A) Move the hydraulics driven arm up (the arms move from below the diablo rollers to above
diablo rollers).
B) Move pipe to end of arm (completed by chain drive).
C) Lower arms (once the arms are below the rollers, the pipe will be supported by the roller.)
D) Turn on diablo rollers and move pipe through the chuck.
E) Turn off diablo rollers
Once the pipe is through the chuck the pipe is easily moved manually back and forth on the gutter ball system. Move pipe back by chuck and hydraulically clamp the pipe. Now it is ready to process pipe.
Outfeed:
Any cut off piece can be easily pushed to the out feed conveyor. At the beginning of the conveyor there is a sensor that detects the edge of the pipe. This will initiate the electrically powered diablo rollers to turn on.
Once the sensor detects that there is no more material the diablo rollers will stop.
For safety reasons another sensor has been add at the far side of the out feed conveyor – if it detects an edge of a pipe it will turn the diablo rollers off preventing any pipe to fall off.
Removing pipe from outfeed conveyor to buffer table:
Integrated in the out feed conveyor there are seven hydraulically driven sloped levelers sitting below the diablo rollers. These levelers are designed with a 2 degree slope. Once initiated from the out feed remote control panel these levelers come up from below the rollers and raise the pipe above the diablo rollers.
With the built- in 2 degrees slope on the levelers they will gravity feed an outfeed buffer rack (not included) that is level with conveyor table. Pipe can outfeed to either direction (toward or away from operator) to suit shop layout.
MACHINE IS OFF SITE APPROXIMATELY 5 MINUTES FROM MODERN TOOL CALGARY
CONTACT: Brandon Hindbo to view - 403-968-0519
THE ENTIRE MACHINE ASSEMBLY HAS NOW BEEN DISASSEMBLED AND PROFESSIONALLY PACKAGED FOR SHIPPMENT!
SUPPORT EQUIPMENT & MISCELLANEOUS
PRATT & WHITNEY 12” VERT. SLOTTER
1997 CHMER CM-380 DIE SINKER, 50M CONTROLS
KEMELL 25T HYD. SHOP PRESS
PALLET RACKING
PARTS SHELVING
SHOP BENCHES, HAND TOOLS
RAPID CLEAN PARTS WASHER
40’ SEACAN CONTAINER ETC.
$900,000 PARTS INVENTORY
MACHINE TOOLING, CONSUMABLES, CHUCKS, PRESS DIES, TRANSFORMERS, TOOL HOLDERS, MACHINE PARTS, PUNCHES, SENC 150 SCALES, ELEC. PARTS, BANDSAW BLADES, SHEAR BLADES, SANDING BELTS, ETC.
MOBILE EQUIPMENT
2006 WESTERN STAR CRANE TRUCK, TRI AXLE, CORMAC FOLDING CRANE, 781,814 KM,
2011 KENWORTH T/A TRACTOR, SLEEPER, 1,565,032 KM
HYSTER H330XL, 32,000# CAP. FORKLIFT, 9680 HRS., 212.5” LIFT, SS, S/N C019D01506K
2019 DODGE RAM 1500 PICKUP, 156,605 KM, 5.7L HEMI
DODGE RAM 1500 PICKUP, HEMI ENGINE, FRONT BUMPER MISSING
CLARK GPS30MC FORKLIFT, 5450# CAP., 123” LIFT PROPSANE, HARD RUBBER
NISSAN 80 FORKLIFT, 8000# CAP., CUSHION RUBBER, PROPANE, 175” LIFT, SS, 4700 HRS.
TOYOTA DUAL FRONT AIR TIRE, TRIPLE MAST, PROPANE (COND’N UNCERTAIN)
SURE TRAC FLATDECT TRAILER, T/A, APPROX. 16’
GENIE GS-1930 SISSOR LIFT
IN CONJUNCTION WITH
MORE SPECS & PHOTOS TO COME SOON!
THE ABOVE LIST IS SUBJECT TO ADDITIONS AND DELETIONS