Hy Tech Portable Machining Ltd - Closeout Online Auction

An 18% Buyer’s Premium applies on all purchases. All purchases must be paid in full by CASH, DEBIT, E-TRANSFER, BANK DRAFT, BANK WIRE TRANSFER (Credit cards [Visa, M/C] accepted on invoices NOT EXCEEDING $2000 on entire purchase). FOR BUYER CONVENIENCE, PAYMENT WILL BE ACCEPTED ON SITE ON THE DAY OF THE SALE ONLY ACCORDING TO THESE PAYMENT METHODS, OTHER THAN BANK WIRE TRANSFERS, Applicable buyer’s premium and 5% GST. Full payment details available on Bidspotter. Everything will be sold “AS IS,” “WHERE IS,” “AS AVAILABLE”, with no warranties, guarantees or representations, expressed or implied.

REMOVAL:

RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.

REMOVAL INFO:

Removal hours 8AM - 5PM daily starting Friday May 23, 2025, Sunday by appointment only. Minor items must be removed by 5PM Tues., May 27, 2025. Major items must be removed by 5PM Thurs., May 29, 2025.

REMOVAL SERVICES

Buyers are required to provide their own rigging service.

RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS

Prime Movers Rigging & Industrial Service Inc.
Attn: Tye Simpson
Mobile: 587-894-4410
tsimpson@primemoversinc.ca

Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com

SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3

CLICK ON ABOVE LOGO TO REGISTER AND BID ONLINE

HY TECH PORTABLE MACHINERY SALE CONTENTS

BORING MILLS
Stanko Horizontal, Model 2620B, 44 ½” x 49” rotary table, Newall DP700 readout, Tail stock w/ readout, 220 volt, 3 ph.:

Niles vertical, 40” dia. Table, 36” under rail, side head & readout, 440 volt, New table bearings:

MACHINE LATHES
Niles Model DLZ800. LIV 4000, 32” swing, 14 ft. between centers, taper attachment, steady & follow rest, 4 jaw chuck, 600 volt, S/N 177000957

ZMM CU 502, 20” swing, 80” between centers, steady & follow rest, Newall DPG readout, 3 jaw chuck, 220 volt, 3 ph., S/N 16925

ZMM CU 402, 16” swing, 60” between centers, Newall DP700 readout, 2 steady rests & 1 follow rest, tools post w/ 4 holders, 220 volt, 3 ph., w/ change gears, S/N 2703:

MILLING MACHINE
Lagun Model FTV-4, 11” x 58” table, Newall DP700 readout

RADIAL ARM DRILL
Carlton 4 ft. arm, 13” column, 220-volt, 3 ph.

METAL CUTTING BANDSAW
DoAll TF-14HA vertical tilt-frame, 45 degree. tilting, hydraulic roller infeed, 575 volt, 22” x 14” cut capacity, hydraulic clamp

OVERHEAD CRANE
Harrington 3 ton w/ 2 Flex EX remote controls, 30 ft. span & 50 ft. runway, 600 volt

TRANSFORMERS
Rex step up, 45 KVA

Rex transformer 9 KVA, 240/600 volt

Sorgel transformer, 30 KVA, 480 volt

MISC. MACHINE TOOLING
Walter tilting rotary table, 20” dia., w/ attachments, Indexing head, 4” hollow spindle, 12” chuck w/ tail stock & index plates, Cincinnati dividing head w/ 12” 4 jaw chuck, Vertex 10” rotary table w/ 3 jaw chuck & tail stock, G & L boring facing head w/ 50 tapper, Assorted angle plates, T-Slot block tables, Boring bars, tool holders, milling cutters, machine vises, insert cutters, 2 tool post grinders, Live centers, Lot of assorted measuring calipers, micrometer, straight edges, etc.

MISC. SHOP EQUIPMENT
Hydraulic Shop press, 80 ton approx., 4 ft. opening, Hydraulic power pack, 7 ½ hp., 220 volt, 3 ph., pedestal heavy duty grinder, assorted power tools, hand tools, 3 hp. Air compressor, Etc.

SURPLUS MACHINES FROM A PRIVATE CONSIGNOR

CNC MACHINES
2011 Haas ST-30Y CNC lathe
21" swing x 23" length, 12" chuck, 4" bar cap., 40hp
See Bidspotter Lot 45 for more specs

2007 Modern BNC 22120XL CNC lathe
21.6" swing (31" over gap/12" over cross slide), 118.1 length, 4400 lb. work piece weight,
12"X, 120"Z travel, 4.17" spindle hole
See Bidspotter Lot 46 for more specs

1999 Dainichi MG 65 x 140 CNC lathe
25.5" swing x 55" centers
See Bidspotter Lot 47 for more specs

2000 Weiler E50 x 1000 CNC lathe
22" swing x 40" machining length, 2 axis, 12" chuck, 1.25" bar cap.
See Bidspotter Lot 48 for more specs

1989 Leadwell LTC-30P CNC lathe
26" max. turning dia. x 18" max. turning length x 62" centers, 3.7" bore, 40hp
See Bidspotter Lot 49 for more specs

CNC PIPE PROFILE CUTTING MACHINE
2015 QSPR CNCPER-42A, 2" - 24" pipe size range, max. pipe length 20' on rollers,
max. workpiece weight 17,500 lbs.
See Bidspotter Lot 50 for more specs

VERTICLE CNC MACHINING CENTER
1994 Shizuoka Millmaster Mod. B-10V
See Bidspotter Lot 52 for more details

2006 Gildemiester DMC-635 V, table - 31.6" x 22"
See Bidspotter Lot 54 for more details

CYLINDRICAL GRINDER
1998 Okuma GP40 x 165, swing 16.93", 66.93" centers, 15.75" max. grinding dia.
See Bidspotter Lot 53 for more details

TURRET LATHE
Warner & Swasey 3A, 24" swing, 52" centers, 6.25 bore, 19.5" 3-jaw chuck, 6 stn. turret
Lot 51 in auction

KEYSEATER
1988 D.C. Morrison 1 1/4", cuts keyways 1/16" to 1 1/4", 34 strokes per minute
See Bidspotter Lot 55 for more details

EDM SINKERS MACHINE
1994 Charmilles Form 4-LC, 31.5" x 19.7" table size
See Bidspotter Lot 56 for more details

COLD SAW
Dutch Saws circular cold cut saw
Lot 57 in auction